Our Kelpi 7” Headlight Conversion Kit is a universal solution for riders wanting to ditch bulky OEM setups and clean up the front end with a slim, high-performance LED unit. Whether you’re swapping out a plastic headlight or just looking to bring some retro vibes to your build, this kit delivers all-day function with timeless form.
This universal version is built to suit a wide range of motorcycles, just provide the diameter of your upper and lower fork tubes (between the triple clamps), and we’ll supply the correct fork-mounted brackets to suit your bike. From commuters needing a more powerful lighting solution, to custom sport-naked builds, it’s never been easier to transform your front end.
We’ve removed the guesswork, everything you need to replace your stock headlight setup is in the box:
7” Kelpi Clearway LED Headlight Unit
Slimline billet headlight bucket
Fork-mounted brackets (sized to your provided fork diameters)
Mounting hardware and fasteners
To make your install even easier, we pre-assemble the Kelpi Clearway LED headlight into our slimline billet bucket before shipping. That means no fiddling with internal mounts or alignment, just bolt it up, plug it in, and ride. It’s the fastest, cleanest solution to a full headlight and bucket conversion with minimal tools and zero headaches.
Powerful 3200 lumen low beam / 3800 lumen high beam output
ADR19 and E-mark compliant for road legality
IP67 waterproof with internal anti-fog venting
Lightweight, anodised billet aluminium construction
Plug-and-play wiring for H4 headlight connectors
Ultra-long 50,000-hour LED lifespan
This kit is universal and made to order based on the upper and lower fork tube diameters you provide, please measure your forks between the top and bottom triple clamps before purchasing.
Headlight uses a standard H4 plug. If your bike uses a different connector (e.g. 6-pin LED factory setup), you may need to adapt the wiring or install an external headlight relay or lighting module.
Bikes with upper fork covers (e.g. some Yamaha models) will require correct measurements to ensure proper bracket sizing.
We’ve built and tested this system on a range of custom bikes in-house. If you’re unsure whether it’ll work for your setup, feel free to reach out via email with a couple of photos and your fork measurements—we’re happy to help you find the perfect fit.
Our Kelpi 7” Headlight Conversion Kit is a universal solution for riders wanting to ditch bulky OEM setups and clean up the front end with a slim, high-performance LED unit. Whether you’re swapping out a plastic headlight or just looking to bring some retro vibes to your build, this kit delivers all-day function with timeless form.
This universal version is built to suit a wide range of motorcycles, just provide the diameter of your upper and lower fork tubes (between the triple clamps), and we’ll supply the correct fork-mounted brackets to suit your bike. From commuters needing a more powerful lighting solution, to custom sport-naked builds, it’s never been easier to transform your front end.
We’ve removed the guesswork, everything you need to replace your stock headlight setup is in the box:
7” Kelpi Clearway LED Headlight Unit
Slimline billet headlight bucket
Fork-mounted brackets (sized to your provided fork diameters)
Mounting hardware and fasteners
To make your install even easier, we pre-assemble the Kelpi Clearway LED headlight into our slimline billet bucket before shipping. That means no fiddling with internal mounts or alignment, just bolt it up, plug it in, and ride. It’s the fastest, cleanest solution to a full headlight and bucket conversion with minimal tools and zero headaches.
Powerful 3200 lumen low beam / 3800 lumen high beam output
ADR19 and E-mark compliant for road legality
IP67 waterproof with internal anti-fog venting
Lightweight, anodised billet aluminium construction
Plug-and-play wiring for H4 headlight connectors
Ultra-long 50,000-hour LED lifespan
This kit is universal and made to order based on the upper and lower fork tube diameters you provide, please measure your forks between the top and bottom triple clamps before purchasing.
Headlight uses a standard H4 plug. If your bike uses a different connector (e.g. 6-pin LED factory setup), you may need to adapt the wiring or install an external headlight relay or lighting module.
Bikes with upper fork covers (e.g. some Yamaha models) will require correct measurements to ensure proper bracket sizing.
We’ve built and tested this system on a range of custom bikes in-house. If you’re unsure whether it’ll work for your setup, feel free to reach out via email with a couple of photos and your fork measurements—we’re happy to help you find the perfect fit.
